We will send you an email to reset your password.
KINDLY PM FOR LATEST STOCK AVAILABILITY BEFORE PURCHASING
1 Year Limited Warranty (T&C applies, warranty excludes human factor damage)
Features
2 x 150W Continuous Power into 4 Ohms and 8 Ohms
250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 Ohms, respectively
PowerDrive?? circuit
Holmgren Toroidal Power transformer
All discrete circuitry
Class A Voltage Stages
Distortion Canceling Circuit
BEE Anti-saturation Clamp
Short signal path from input to output
All sockets Gold-plated
Soft Clipping??
ATOLogic 12 volt trigger/ signal sensing input
Detachable IEC Power Cable
<1W Standby Power Consumption
Free of lead and other environmentally dangerous substances
Fixed IN, Speaker OUT
Continuous output power into 8 Ohm and 4 Ohm (both channels driven)
>150W (ref. rated THD, 20Hz ??20kHz)
Continuous output power into 8 Ohm (Mono, Bridge mode)
>330W (ref. 20Hz ??20kHz, (Mono, Bridge mode) <0.02% THD)
Rated THD (250mW to rated power, CCIF IMD, DIM 100)
<0.008% (ref. 20Hz ??20kHz)
Clipping power (4 Ohm and 8 Ohm)
>170W (ref. 1kHz 1% THD)
IHF Dynamic Power
8 Ohm
250W
4 Ohm
410W
2 Ohm
600W
IHF dynamic power (Bridge mode)
8 Ohm
800W
4 Ohm
1200W
Peak output current
>50A (ref. 1 Ohm, 1ms)
Signal/Noise ratio
>102dB (A-weighted, ref. 1W)
>123dB (A-weighted, ref. 150W)
Damping factor
>180 (ref. 8 Ohm, 50Hz and 1kHz)
Frequency response
??0.1dB (ref. 20Hz ??20kHz)
3Hz ??100kHz (ref. -3dB)
Input impedance (Fixed IN)
10 kilohm + 200pF
Input impedance (Variable IN)
100 kilohm + 100pF
Input Sensitivity
1.2V (ref. rated power)
Voltage gain
29dB
Minimum input level for AUTO TRIGGER
10mV at 1kHz
Time to power OFF at no signal in AUTO mode
<10 minutes
Power Consumption
Normal operation
312W (ref. 230V AC 50Hz; 120V AC 60Hz)
Standby power
<1W
Idle power
<100W
Weight & Dimensions
Dimensions (W x H x D)
Net
435 x 133 x 352mm
17 1/8??x 5 1/4??x 13 3/4??/p>
Gross*
435 x 150 x 396mm
17 1/8??x 6??x 15 3/8??/p>
Net weight
32.2 lbs (14.6 kg)
Shipping weight
37.3 lbs (16.9 kg)
*Gross dimensions include feet, extended buttons and rear panel terminals.