your cart


No products in the cart.

1 Year Limited Warranty (T&C applies, warranty excludes human factor damage)
Key Features

80W x 2 Continuous power into 8 or 4 Ohms

Bluetooth A2DP with aptX supported

MM Phono input

Analogue line inputs

SPDIF coax and optical inputs

Speaker A, Speaker B

Stereo or Bridge mode configuration

Preamp/Subwoofer out

Headphone amplifier

MDC Slots for future upgrades

IR Remote

Smartphone Control App

12V Trigger in/out

IR in/out

RS-232 Serial port for control

Control4, Crestron, RTI, URC, AMX, Savant, Elan certified


Line Input, Pre Out

THD (20Hz-20kHz)
<0.005% at 2V out

Signal/Noise Ratio
>106dB (IHF; A-weighted, ref. 500mV out, unity gain)

Channel Separation
>80dB (1kHz); >70dB (10kHz)

Input Impedance (R and C)
22 kilohm + 100pF

Maximum Input Signal
>4.5Vrms (ref. 0.1% THD)

Output Impedance
Source Z + 240 Ohm

Input Sensitivity
93mV (ref. 500mV out, Volume maximum)

Frequency Response
??0.03dB (20Hz-20kHz)

Maximum voltage output ??IHF load
>4.5V (ref. 0.1% THD)

Tone Controls
Treble: ??7.0dB at 20kHz
Bass: ??7.0dB at 60Hz
Balance: -10dB

Phono Input, Pre Out

THD (20Hz-20kHz)
<0.01% at 2V out

Signal to Noise Ratio
>84dB (200 Ohm source; A-weighted, ref. 500mV out)
>76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)

Input Sensitivity
1.44mV (ref. 500mV out, Volume maximum)

Frequency Response
??0.3dB (20Hz-20kHz)

Maximum Input Signal at 1kHz
>80mVrms (ref. 0.1% THD)

Line Input, Headphone Out

THD (20Hz-20kHz)
<0.005% at 1V out

Signal/Noise Ratio
>110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)

Frequency Response
??0.3dB (20Hz-20kHz)

Channel Separation
>60dB at 1kHz

Output Impedance
6 Ohms

General Specifications

Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)
>80W (ref. 20-20kHz at rated THD, both channels driven)

Continuous Output Power into 8 Ohms (Bridge Mode)
300W (at 20-20kHz at THD 0.03%)

THD (20Hz-20kHz)
<0.03% (250mW to 80W, 8 Ohms and 4 Ohms)

Signal to Noise Ratio
>98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)

Clipping Power
>95W (at 1kHz 0.1% THD)

Clipping Power (Bridge Mode)
>315W (at 1kHz 0.1% THD)

IHF Dynamic Power
8 Ohms 120W
4 Ohms 200W
2 Ohms 250W

IHF Dynamic Power (Bridge Mode)
8 Ohms 500W
4 Ohms 560W

Peak Output Current
>20A (in 1 Ohm, 1ms)

Damping Factor
>300 (ref. 8 Ohms, 20Hz and 6.5kHz)

Frequency Response
??0.3dB (20Hz-20kHz)

Channel Separation
>75dB (1kHz)
>70dB (10kHz)

Input Sensitivity (for 80W in 8 Ohms)
Line In: 470mV; Digital In: 21% FS

Sample Rate
up to 24 bit/192kHz

Frequency Band2.402G-2.480G

Maximum Transmit Power (dBm)
7dBm ??2dBm

Weight & Dimensions

Gross Dimensions (W x H x D)*
435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)??/p>

Net Weight
7.8kg (17.2lb)

Shipping Weight
10.1kg (22.3lb)

*Gross dimensions include feet, extended buttons and rear panel terminals


Added to cart successfully!