We will send you an email to reset your password.
KINDLY PM FOR LATEST STOCK AVAILABILITY BEFORE PURCHASING
WARRANTY: 1 Year Limited (T&C applies, warranty excludes human factor damage)
Topping PA5 - Class D Fully Balanced Power Amplifier
- 140W x2 (@ 4ohm, 10% THD+N)
- 125W x2 (@ 4ohm, 1& THD+N)
- Fully Balanced Amplifier
- 124dB SNR
- <0.0004% THD+N
- TRS x2 Input
FULLY BALANCED
The newly developed Class D amplification circuit uses multiple novel optimization techniques to fully push the performance and output power to the maximum.
The new circuit provides crisp, clean and deep sound with completely inaudible noise floor. The fully balanced structure makes PA5 no more hum, no more noise, no more ground loop.
DISTORTION IS AS OUTSTANDING AS DAC
<0.0005% @ 4ohm 5W; <0.0004% @ 8ohm 5W. The distortion of PA5 is as low as that of DAC. Even in the vicinity of the commonly used 20W, PA5 can achieve 0.0003% THD+N under 8 ohm load.
HIGH OUTPUT POWER
PA5 could output 140W x2 at 4 ohm load, 10% THD+N. In higher standard of THD+N of 1%, output power will be 125W x2 at 4ohm load.
The high output power and low distortion on load are sufficient for most speakers and applications.
Zero pop noise or thumping during turn-on or turn-off. Over-voltage, under-voltage, short-circuit, over-current, over-heat protection are complete.
SPECIFICATIONS
** refer to product listing picture **
WARRANTY: 1 Year Limited (T&C applies, warranty excludes human factor damage)
Topping PA5 - Class D Fully Balanced Power Amplifier
- 140W x2 (@ 4ohm, 10% THD+N)
- 125W x2 (@ 4ohm, 1& THD+N)
- Fully Balanced Amplifier
- 124dB SNR
- <0.0004% THD+N
- TRS x2 Input
FULLY BALANCED
The newly developed Class D amplification circuit uses multiple novel optimization techniques to fully push the performance and output power to the maximum.
The new circuit provides crisp, clean and deep sound with completely inaudible noise floor. The fully balanced structure makes PA5 no more hum, no more noise, no more ground loop.
DISTORTION IS AS OUTSTANDING AS DAC
<0.0005% @ 4ohm 5W; <0.0004% @ 8ohm 5W. The distortion of PA5 is as low as that of DAC. Even in the vicinity of the commonly used 20W, PA5 can achieve 0.0003% THD+N under 8 ohm load.
HIGH OUTPUT POWER
PA5 could output 140W x2 at 4 ohm load, 10% THD+N. In higher standard of THD+N of 1%, output power will be 125W x2 at 4ohm load.
The high output power and low distortion on load are sufficient for most speakers and applications.
Zero pop noise or thumping during turn-on or turn-off. Over-voltage, under-voltage, short-circuit, over-current, over-heat protection are complete.
SPECIFICATIONS
** refer to product listing picture **